8-Ports 10/100Mbps Passive PoE switch with external power supply - Cost-effective PoE Switch - PoE Switch - Products

Products

Home >> Products >> PoE Switch >> Cost-effective PoE Switch

8-Ports 10/100Mbps Passive PoE switch with external power supply
Model:PS-SF71

◆Supply power to wireless AP and IP Camera through CAT 5 cable

◆8 x 10/100 Mbps RJ45 Ports, 1-7 port support PoE,

◆Flow Control: Full duplex based on IEEE802.3x, Half duplex based on Back Pressure

◆Total PoE Power: 65W (Port 1 - 4)

◆PoE Power for Each Port: 15.4W

◆No fan design, natural cooling feature.

Details

This cost-effective switch provides network layout which need to simplify wireless access point (AP) and IP-based surveillance network cameras to install in commercial network and home network. It is the ideal networking solution for work-groups and intelligent community fiber access.These devices away from electrical outlets are very suitable for hanging on the wall or ceiling. PoE eliminates the hassle for these devices, specially the electrical outlets. Connect the AC power connection to make those difficult device more flexible, and the installation cost minimization.

Feature:

10/100Mbps 7 Port Passive PoE Switch

7 x 10/100Mbps RJ45 ports

Compatible with IEEE802.3af/at solution, Continuous flow of power with NO detection.

Compact design with exclusive interlocking installation.

Supply power to millions HD webcam through Cat5 Ethernet cable.

No fans, natural cooling, small and exquisite, no noise design, suitable for desktop or wall.

Main Application:

VoIP Telephones; IP Security Cameras; IP Print Servers

Wireless Network Access Points and Bridges

Other PoE enabled devices

Standards Conformance

Ethernet standards

IEEE 802.3 (Ethernet), IEEE 802.3u (Fast Ethernet)

IEEE 802.3x (Full-duplex flow control) IEEE 802.3az (Efficient Ethernet)

Power over Ethernet

7-Port PoE injector (Port 1 – port 7)

PoE Power PIN assignment

PIN 4/5 (+), PIN 7/8 (-)

PoE Power output

802.3af: per port Max. 15.4 watts

PoE Power Budget

65W

Hardware Specification

Ethernet Interface

8 x 10/100Base-TX RJ-45 Auto-MDI/MDI-X ports

Switch Processing Scheme

Store-and-Forward

Throughput (packet per second)

10Mbps：14880pps
100Mbps：148800pps

Switch fabric

1.6Gbps

Address Table

2K entries

Flow Control

Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex

General

Construction

Metallic housing

LED indicators

Act/Link, Power, PoE, PoE status

Dimensions (L × W × H)

125x 69 x 23mm

Power Consumption

100-240V～50-60Hz, 0.6A

Operational Environment

Operating Temperature: 0℃- 40℃

Storage Temperature: -10℃- 70℃

Operating Humidity: 10%~90% non-condensing

Storage humidity: 5%~90% non-condensing

Email: Support@pluspoe.com

Standards Conformance
Ethernet standards	IEEE 802.3 (Ethernet), IEEE 802.3u (Fast Ethernet)
Ethernet standards	IEEE 802.3x (Full-duplex flow control) IEEE 802.3az (Efficient Ethernet)
Power over Ethernet	7-Port PoE injector (Port 1 – port 7)
PoE Power PIN assignment	PIN 4/5 (+), PIN 7/8 (-)
PoE Power output	802.3af: per port Max. 15.4 watts
PoE Power Budget	65W
Hardware Specification
Ethernet Interface	8 x 10/100Base-TX RJ-45 Auto-MDI/MDI-X ports
Switch Processing Scheme	Store-and-Forward
Throughput (packet per second)	10Mbps：14880pps 100Mbps：148800pps
Switch fabric	1.6Gbps
Address Table	2K entries
Flow Control	Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex
General
Construction	Metallic housing
LED indicators	Act/Link, Power, PoE, PoE status
Dimensions (L × W × H)	125x 69 x 23mm
Power Consumption	100-240V～50-60Hz, 0.6A
Operational Environment	Operating Temperature: 0℃- 40℃ Storage Temperature: -10℃- 70℃ Operating Humidity: 10%~90% non-condensing Storage humidity: 5%~90% non-condensing